Detail VIBRATION ANALYZER – KIT FOR BUILDING VIBRATION
Vibration Meter
HD2070.BV Kit to measure vibrations and evaluate annoyance in case of building constructions,
demolishing, road and railway constructions according to UNI 9614:2017; EN ISO
8041-1:2017; ISO 2631-2:2003.
The kit is composed by the following codes:
- HD2070.K1 – 3-channel vibration analyzer
- HDBV-1000 – IEPE tri-axial accelerometet.
- HD2030.CAB3M-5M – cable for connection
- HD2030AC5 – support for accelerometers
HD2070.K1 3-channel vibration analyzer kit for IEPE accelerometers - data logging functions with
8 MB memory and SD card – recording of vocal comments associated to the
measurements – RS232 and USB interface.
HD2070 is compliant with ISO 8041, ISO 2631, ISO 5349 and IEC 61260 normatives.
The HD2070.K1 includes the HD2070 3-axis vibration analyzer with data logging and
storing of vocal comments, HD6188 silicone grease, HD6273 wax tray for accelerometers
gluing, 080A90 glue, HD2070MC 8 GB SD memory card, CP22 USB serial cable for PC
connection (alternatively, on request, HD2110CSNM cable for RS232 - COM type - serial
ports), Noise Studio software for PC with Windows® operating systems downloadable
from Delta OHM website, user manual and carrying case, ISO 9001 calibration report
for HD2070 vibration analyzer according to ISO 8041.
HDBV-1000 IEPE tri-axial high sensitivity accelerometer. Using the mounting kit (included) the
accelerometer can be used in combination with HD2030AC5 floor measurement adapter
Sensitivity 10 V/g - Range ±5 m/s2 pk - Weight 50 g - Threaded hole 10-32 UNF - Connector
M5 4 pin - Residual noise (Wm ISO2631-2) < 1 mm/s2
Includes:
• Mounting Kit for HD2030AC5 and Calibration chart
HD2030.CAB3M-5M Cable for connection of tri-axial accelerometers with 4pin M5 connector.
Length 5 m, equipped with the following connectors:
• Accelerometer side: multipolar M5 4 pin
• Instrument side: multipolar circular push-pull 4-pin connector
HD2030AC5 Support for ground/floor accelerometers provided with levelling device and three feet, the
height of two of the feet is adjustable. The support has a cavity on the bottom side with a M4 threaded hole.
