Detail Portable Infrared Flue Gas Analyzer
Gas Analyzer
Introduction:
It is portable type and used to measure concentration of SO2, NO, CO, CO2 and O2 from stack or boiler emission gases, in which SO2, NO, CO and CO2 are measured by micro-flow infrared sensors and O2 by electrochemical sensor, with optional gas temperature, pressure, velocity etc, calculating combustion efficiency, lambda, etc.
Applications:
Combustion and emission control research or certification of Continuous Emission Monitoring System (CEMS), combustion efficiency monitoring for various industrial furnaces or refuse incinerator and boiler.
Features:
1. Integrate heated sampling probe and sampling hose.
2. Built-in heated filter, prevent sampling loss.
3. Max working temperature 200℃.
4. Smart design, safe and reliable.
5. Filter element: 2 um
6. Length: 3m
7. Power supply: 220V
8. Power consumption: 330W
9. environmental temperature: -40℃—140℃
Specifications:
Measurement: SO2, NO, CO, CO2, O2
Technology: SO2, NO, CO, CO2 (Micro-flow NDIR)
O2 (Electrochemical)
Range: SO2: 0-2000ppm
NO: 0-2000ppm
CO: 0-5000ppm
CO2: 0-25%
O2: 0-25%
(Note: measurement range can be customized by the requirement.)
Resolution: SO2, NO, CO: 1ppm
CO2, O2: 0.01%
Precision: SO2, NO, CO, CO2 ≤±2%
O2 ≤±3%
Repeatability: SO2, NO, CO, CO2, O2 ≤1%
Zero/Span drift: SO2, NO, CO, CO2 ≤±2%
O2 ≤±3%
Response time (T90): <10s (NDIR)
Warm-up time: 30 minutes
Communication Interface: RS232
Work temperature: 0-50℃
Relative humidity: 5-85%
Ambient pressure: 86-108kPa
Power supply: AC 220V 50Hz±1Hz
Specification of temperature measured:
Parameter
Method
Thermistor
Resolution
Precision
Flue gas temperature
Thermocouple
-10—600℃
1℃
±2℃
Ambient air temperature
Thermistor
-10—100℃
1℃
±1℃
Specification of pressure measured:
Parameter
Method
Range
Resolution
Dynamic Pressure
Silicon Pressure Chip
-50hPa—50hPa
1Pa
Ambient air pressure
Silicon Pressure Chip
70kPa—120kPa
0.1kPa
Gas analyzer features:
1. Innovative micro-flow NDIR technology.
2. Measure SO2, NO,CO,CO2,O2 and optional temperature, pressure and flow.
3. Less interference of H2O for SO2 and NO measurement.
4. Built-in zero pump and auto zero calibration with fresh air.
5. Optional printer.
6. Calculation of Lambda and combustion efficiency.
7. Touch screen.
8. USB output.
Gas conditioning system features:
1．Efficient peltier dehumidifiers for humidity measurement of low concentrations. 2．PID temperature control.
3．Needle valve flow control.
4．Built-in sampling pump and peristaltic pump.
