Back to Top

1
Hi, Guest!
MULTISENSOR PHOTO – RADIOMETER

MULTISENSOR PHOTO – RADIOMETER

Update Terakhir 14 / 04 / 2022
Minimal Pembelian 1 Unit

Harga

CALL
Bagikan
DESKRIPSI PRODUK

Detail MULTISENSOR PHOTO – RADIOMETER

Alat Meteorologi
Multisensor instrument, datalogger for measuring non-coherent optical radiations in accordance with the European directive 2006/25/EC and legislative decree n. 81/2008.
Sensors: photometric for measuring illuminance (380÷780 nm), radiometric for the UV
range (220÷400 nm) with spectral weighting factor S(λ), radiometric for the UVA range
(315÷400 nm), radiometric for the range 400÷700 nm (blue) with spectral weighting factor B(λ), radiometric for the IR range (700÷1300 nm) with spectral weighting factor
R(λ), thermopile for measuring IR irradiance (400÷2800 nm).
Powered directly by the PC or by an external power supply.
Includes DeltaLog13 software downloadable from Delta OHM website.
Supplied with: CH20–ROA hardware key to enable the software, CP24H connecting cable,
SWD05 power supply, VTRAP30 tripod, instruction manual, carrying case and compliance
report.

CALIBRATIONS
VCERT-L2402 Single calibration report for all the sensors. One point only for each sensor. 740
VACCREDIA-L9 ACCREDIA certificate for the accredited measurements (Luxmeter and UVA) and single calibration report for the remaining
sensors. Luxmeter ACCREDIA certificate: range 50÷4000 lux. UVA radiometer ACCREDIA certificate: range 10÷45 W/m2
.
ACCESSORIES
CH20-ROA Hardware key for PC with Windows® operating systems. When connected to a USB port, it enables the use of the
DeltaLog13 software with the HD2402 instrument. (To replace the one supplied with the kit, in case of loss or failure).
DELTALOG13 USB flash drive of DeltaLog13 software for the connection to the PC for instrument configuration and data download. For
Windows® operating systems.

CP24H PC or power supply connecting cable, with M12 connector on instrument side and male A type USB connector on
PC/power supply side. HID type cable: installation of USB drivers in the PC is not required.

SWD05 100-240 Vac / 5 Vdc-1 A stabilized mains power supply. Output with A type USB connector.
VTRAP30 Tripod max height 157 mm. The probe can be oriented in all directions.