Detail 2L Rotary Evaporator With Electric And Manual Lifting
Rotary Evaporator
2L rotary evaporator with electric and manual lifting
Rotary evaporator is a device used in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation.
DESCRIPTION
Rotary evaporator is the necessary basic instrument for chemical industry, medicine industry, institutions of higher learning and scientific research laboratory and other units, it is the main means for manufacturing and analyzing experiments when they do extraction and concentration.
FEATURES
1. The parts in contact with materials are all made of high borosilicate glass (expansion coefficient 3.3) and polytetrafluoroethylene materials, which are stable in performance and difficult to chemically react with materials. 2. The main frame is made of cold plate anti-corrosion spray + aluminum alloy material, and the pot is made of stainless steel.
3. The sealing system adopts a combination of PTFE rotating shaft and fluorine rubber gasket for sealing.
4. The piston-type feeding valve is sleeved with a polytetrafluoroethylene extension tube, which can continuously feed to the evaporating flask under vacuum.
5. Vertical double-layer serpentine coil glass condenser.
6. Rotating and heating power switch control, double-joint tilt button (ON-OFF).
7. Electronic stepless speed regulation, fine-tuning through the knob.
8. Digital display of temperature of constant temperature bath, Cu50 sensor + stainless steel probe at the bottom of the pot.
9. The main engine is operated by electric lifting, lifting and lowering buttons (it can also be lifted by hand wheel).
10. Rotating and heating double fuse safety protection.
SPECIFICATIONS
Model
LRE-5299
Glass material
GG-17
Frame material
Plastic spray anticorrosion
Shell material
Plastic spray anti-corrosion 265 * 310 * 80mm
Pot material
Stainless steel 250 * 140mm
Rotary bottle volume
1L 24 # standard port
Collection bottle volume
0.5L 24# standard port
Vacuum degree
0.098Mpa
Rotation power
30W
Rotating speed
0-120rpm
Heating power
1KW
Temperature range
0-99℃
Accuracy
±1℃
Lifting power
15W1/15
Lifting height
120mm
Voltage
220V/50Hz
Dimension(mm)
770*440*1005
Packing size(mm)
590*460*460
Packing weight（KG）
21
Speed mode
Electronic stepless speed regulation
Temperature display mode
Digital display of CU50 sensor
Temperature control method
Intelligent temperature control
Sealing method
PTFE component seal
Condenser
Vertical condenser 85 * 460mm 29 # standard port
Lifting method
Host automatic lifting
Continuous feeding
19 # standard port feeding valve
