Detail 1L Rotary Evaporator With Slide And Manual Lifting
Rotary Evaporator
1L rotary evaporator with slide and manual lifting
Rotary evaporator (or rotavap/rotovap) is a device used in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation.
DESCRIPTION
Rotary evaporator (equipment) series products are mainly used in the testing, research and development and production of pharmaceutical, chemical, biological products and other industries. This product uses the principles of constant temperature heating and thin film evaporation to perform evaporation, concentration, crystallization, drying, separation, solvent recovery and other operations under vacuum negative pressure conditions. All parts in contact with the material are resistant to high temperatures and corrosion. Borosilicate glass and polytetrafluoroethylene materials are particularly suitable for the concentration and purification of biological products that are easily decomposed and denatured, and are not easy to produce chemical reactions with various materials.
FEATURES
1. The parts in contact with materials are all made of high borosilicate glass (expansion coefficient 3.3) and polytetrafluoroethylene materials, which are stable in performance and difficult to chemically react with materials.
2. The main frame is made of aluminum alloy, and the pot is made of 304 stainless steel.
3. The sealing system adopts PTFE + fluorine rubber compound combination seal.
4. The piston-type feeding valve is sleeved with a polytetrafluoroethylene extension tube, which can continuously feed to the evaporating flask under vacuum.
5. One-piece condenser, upright double-layer serpentine coil.
6. Rotating and heating power switch control, tilt button (ON-OFF).
7. Electronic stepless speed regulation, fine-tuning by twisting, digital display of speed.
8. The temperature of the constant temperature bath is digitally displayed, the bottom of the pot is PT100 sensor + stainless steel probe.
9. The main machine is lifted manually, sliding lift + manual lift two-stage lift.
10. Rotating and heating double fuse safety protection.
11. Equipped with a transparent plexiglass protective cover to prevent the hot liquid from splashing out of the bath.
SPECIFICATIONS
Model
LRE-2010
Glass material
GG-17
Frame material
Aluminum
Pot material
Aluminum alloy + Teflon composite pot, fully enclosed heating 250 * 130mm
Rotating flask volume
1L 24 # standard mouth (optional 500-3000ml)
Receiving flask volume
1L 35 # Ball grinding mouth
Rotating power
40W
Rotating speed
20-200rpm
Evaporation capacity
20ml/min Evaporation of water）
Vacuum degree
0.098Mpa
Heating power
1.5KW
Temperature control range
0-99℃
Accuracy
±1℃
Lifting height
100mm+150mm (Slide lift + manual lift）
Voltage(V/Hz)
220V/50Hz
Dimension (mm)
550*400*（780-1040）
Package size (mm)
720*525*385
Weight（KG）
20
Speed mode
Electronic stepless speed regulation
Temperature display mode
PT100 sensor digital display
Temperature control method
Intelligent temperature control
Sealing method
Teflon + fluorine rubber double seal ring
Lifting method
Manual weight balance method
Condenser
Vertical condenser ￠ 85 * 430mm, optional inclined condenser
Continuous feeding
19 # standard port feeding valve
Splash-proof function
Organic transparent cover
Security function
Overload protection function (safety tube)
